ROBOT-EYE・The monitoring mold system・SIGMAX of mold protection

The monitoring mold system・Mold protection・Confirmation of falling・Precision molding・Insert molding・Monitoring insert・Frequently asked questions for short monitoring SIGMAX

SIGMAX CO., LTD
Japanese Chinese
The monitoring mold system・Mold protection・SIGMAX CO., LTD
Company ProfileAbout ROBOT-EYEROBOT-EYE processProduct lineupFrequently asked questions
Home > Frequently asked questions
Frequently asked questions
FAQ
[Q1]How does the monitoring mold system judge?
[Q2]Is it necessary to set sensitivity for each set area ?
[Q3]Is it possible to monitor transparent molded parts(lens or medical parts) ?
[Q4]Is it possible to monitor what size of short shot?
[Q5]Is it affected by the shadow of the crane or sun light in the mold plant?
[Q6]Is the monitored mold size limited ?
[Q7]Is it possible to use properly one monitoring system for plural molding machine if necssary?
[Q8]Where shoud we install the camera and the main unit in ?

Q1How does the monitoring mold system judge?
A1Under the setting conditions, it judges with a brightness difference in set area.

Q2 Is it necessary to set sensitivity for each set area ?
A2 One sensitivity is set then each set area is set appropriate sensitivity automatically.

Q3Is it possible to monitor transparent molded parts(lens or medical parts) ?
A3It is possible to monitor the visible things even transparency.

Q4Is it possible to monitor what size of short shot?
A4 Depending on mold size or molded parts, but it's possible to detect a short shot of the 0.5mm size as refference in a set area of 900 millimeters.

Q5Is it affected by the shadow of the crane or sun light in the mold plant?
A5 We adopt the software that is not affected by the agitation light or the other peripheral environmental changes.
And we adopt the Halogen light that is hard to be affected.

Q6Is the monitored mold size limited ?
A6 No it's not limited. The monitoring area is changeable freely by selecting of the camera lens.

Q7 Is it possible to use properly one monitoring system for plural molding machine if necssary?
A7 Yes it's possible to wire to the molding machine for the monitoring system that should be monitored beforehand.

Q8Where shoud we install the camera and the main unit in ?
A8 The camera is installed in the space by the stand of the magnet base.

The main unit is installable on the stand with the casters or to be hanged up the molding machine.

Frequently asked questions
 
 
 
 
 
Contact us
Please talk about an inquiry・document request about the monitoring mold system willingly.
Catalogue download
You can download the various monitoring mold system catalogues.
The movement of ROBOT-EYE FLASH
Please see the movement of the monitoring mold system ROBOT-EYE.

◆SIGMAX CO., LTD.◆
Development and sales of the monitoring mold system
【TEL】+81-45-264-2661
【FAX】+81-45-264-2660
【ADDRESS】
Meiji Yasuda Seimei Radio Nippon Bldg. 5-85, Choja-machi,Naka-ku,Yokohama 231-0033 Japan.